How to Install a Rifle Sling Without Swivels
Installing a rifle sling without swivels can be a bit tricky, but it’s certainly doable with the right approach and a few essential tools. Whether you’re looking to customize your rifle setup or simply don’t have access to swivels, this guide will walk you through the process step by step.
1. Gather the Necessary Materials
Before you begin, make sure you have all the necessary materials on hand. You’ll need the following:
– Rifle sling
– Threaded sleeve or shock cord
– End caps or stoppers
– Optional: Heat shrink tubing
2. Measure and Cut the Threaded Sleeve
Start by measuring the distance between the mounting points on your rifle where you’ll be attaching the sling. This measurement will determine the length of the threaded sleeve or shock cord you’ll need. Cut the sleeve or cord to the desired length, leaving a little extra room for adjustment.
3. Attach the End Caps or Stoppers
Slide the end caps or stoppers onto the ends of the threaded sleeve or shock cord. If you’re using heat shrink tubing, slide it over the ends as well. This will prevent the sleeve or cord from unraveling and ensure a secure fit.
4. Attach the Sling to the Rifle
Now, it’s time to attach the sling to your rifle. Thread the sleeve or shock cord through the mounting points on your rifle. Ensure that the sleeve or cord is snug but not too tight, as this could cause discomfort or injury while shooting.
5. Adjust the Sling
Once the sleeve or cord is securely in place, adjust the sling to your desired length. You may need to make a few adjustments to ensure the sling is comfortable and allows for easy movement while shooting.
6. Secure the Sling
Finally, secure the sling by sliding the end caps or stoppers into place. If you used heat shrink tubing, apply heat to shrink the tubing and create a tight seal. This will prevent the sleeve or cord from coming loose and ensure your sling stays in place.
7. Test the Sling
After the sling is installed, give it a test run to ensure it’s comfortable and functional. Adjust the length and tension as needed until you’re satisfied with the setup.
Conclusion
Installing a rifle sling without swivels may seem daunting at first, but with this guide, you can easily create a custom, secure sling for your rifle. By following these steps and using the right materials, you’ll have a functional and comfortable sling that’s tailored to your needs.
