How to Install a Tub Spout with Diverter
Installing a tub spout with a diverter is a relatively straightforward process that can greatly enhance the functionality and aesthetics of your bathroom. Whether you’re replacing an old fixture or adding a new one, this guide will walk you through the steps to install a tub spout with diverter successfully.
First, gather all the necessary tools and materials before you begin. You will need a screwdriver, adjustable wrench, plumber’s tape, and the new tub spout with diverter. Make sure you have the correct size and type of spout for your tub.
1. Turn off the water supply to the tub. This is crucial to prevent any water from escaping during the installation process. Locate the shut-off valves and turn them clockwise to close them.
2. Remove the old tub spout. If it’s a push-on type, simply push it off. If it has screws, use a screwdriver to remove them and then pull the spout off.
3. Clean the area where the new spout will be installed. Remove any old plumber’s tape or debris from the tub and faucet threads. This will ensure a tight and secure fit for the new spout.
4. Apply plumber’s tape to the threads of the faucet. This will create a seal and prevent leaks. Wrap the tape around the threads, starting at the end and winding it in a clockwise direction.
5. Insert the new tub spout with diverter into the faucet. Line up the threads and gently push the spout onto the faucet. If it’s a threaded type, use an adjustable wrench to tighten it securely.
6. Connect the diverter to the spout. The diverter is the part that allows you to switch between the tub spout and the showerhead. Attach it to the spout using the included hardware, and tighten it securely.
7. Reconnect the water supply to the tub. Turn the shut-off valves counterclockwise to open them. Check for any leaks by running water through the spout and diverter. If you notice a leak, tighten the connections and check again.
8. Test the new tub spout with diverter. Turn on the water and observe the flow from both the spout and the diverter. Adjust the diverter as needed to ensure proper operation.
By following these simple steps, you can install a tub spout with diverter in your bathroom. This addition will not only improve the functionality of your tub but also enhance the overall look of your bathroom. Enjoy your new, upgraded tub setup!
