How to Install Roller Blinds Inside Mount
Installing roller blinds inside mount is a popular choice for many homeowners and renters due to its sleek and modern look. Inside mount roller blinds are mounted inside the window frame, which provides a clean and unobtrusive appearance. If you’re looking to install roller blinds inside mount, follow these simple steps to ensure a successful installation.
Materials Needed:
Before you begin, gather the following materials:
– Roller blinds
– Measuring tape
– Level
– Drill and drill bits
– Screwdriver
– Mounting brackets
– Wall anchors (if necessary)
– Screw
Step 1: Measure the Window
Begin by measuring the width and height of your window. Ensure that you measure the inside of the window frame, as this is where the roller blinds will be mounted. Write down the measurements for future reference.
Step 2: Choose the Right Roller Blinds
Select roller blinds that fit the dimensions of your window. It’s important to choose blinds that are slightly smaller than the window frame to ensure a tight fit and a sleek appearance.
Step 3: Prepare the Window Frame
If the window frame is made of wood, ensure that it is clean and dry. If the frame is made of metal or another material, check for any sharp edges or rough spots that could damage the blinds. Sand down any rough areas if necessary.
Step 4: Install the Mounting Brackets
Attach the mounting brackets to the inside of the window frame using the provided screws. Ensure that the brackets are level and securely fastened. If the brackets are too long, trim them to fit.
Step 5: Attach the Roller Blinds to the Mounting Brackets
Hang the roller blinds on the mounting brackets. Most roller blinds come with a bracket that attaches to the blind’s headrail. Simply slide the bracket onto the headrail and secure it in place. Adjust the brackets as needed to ensure a snug fit.
Step 6: Install the Headrail
Slide the headrail onto the brackets, ensuring that it is level. Secure the headrail in place using the provided screws.
Step 7: Adjust the Roller Blinds
Once the headrail is installed, adjust the roller blinds to your desired position. You can use the cord or chain to roll up or down the blinds. Ensure that the blinds are even and aligned with the window frame.
Step 8: Final Check
Double-check the installation to ensure that the roller blinds are securely mounted and functioning properly. Make any necessary adjustments to the brackets or headrail if needed.
Conclusion:
Installing roller blinds inside mount is a straightforward process that can greatly enhance the appearance of your home. By following these simple steps, you can enjoy a sleek and modern look with minimal effort. Happy installing!
