How to Install Wright Door Closer
Installing a Wright door closer is a straightforward process that can enhance the functionality and safety of your door. Whether you’re replacing an old door closer or installing one for the first time, following these steps will ensure a successful installation. In this article, we’ll guide you through the process of installing a Wright door closer, from gathering the necessary tools to completing the installation.
Step 1: Gather the Necessary Tools and Materials
Before beginning the installation, gather all the necessary tools and materials. You’ll need the following:
– Wright door closer
– Screwdriver
– Wrench
– Level
– Pencil
– Tape measure
– Chisel
– Wood shims
– Wood screws
Step 2: Choose the Right Location
Select the location where you want to install the door closer. Ensure that the door closer is mounted on a sturdy, level surface. The mounting plate should be installed on the hinge side of the door, as this is where the door closer will be attached.
Step 3: Remove the Existing Door Closer (if applicable)
If you’re replacing an old door closer, remove it by unscrewing the mounting plate from the door frame. Be sure to keep track of any existing screws and hardware, as you’ll need them for the new installation.
Step 4: Mark the Mounting Plate Location
Using a pencil and level, mark the location where the mounting plate will be installed. The mounting plate should be mounted at the top of the door frame, directly over the hinge side of the door. Ensure that the marks are level and that the mounting plate will be securely fastened to the door frame.
Step 5: Install the Mounting Plate
Using a screwdriver, attach the mounting plate to the door frame. Make sure the plate is level and securely fastened. If necessary, use wood shims to ensure the plate is level.
Step 6: Attach the Door Closer to the Mounting Plate
Place the door closer on top of the mounting plate and align the holes. Use the provided screws to attach the door closer to the mounting plate. Tighten the screws securely, but be careful not to over-tighten, as this can damage the door closer.
Step 7: Adjust the Door Closer
Adjust the door closer according to the manufacturer’s instructions. This may involve adjusting the spring tension, door closing speed, or latch engagement. Make sure the door closes smoothly and securely.
Step 8: Test the Door Closer
After adjusting the door closer, test the door to ensure it operates correctly. The door should close smoothly and securely, with no excessive force or resistance. If the door closer is not functioning properly, revisit the adjustment steps and make any necessary changes.
Conclusion
Installing a Wright door closer is a relatively simple process that can improve the functionality and safety of your door. By following these steps and taking your time to ensure proper installation, you’ll have a reliable door closer that will serve you well for years to come.
