How to Make Pillow Case Covers
Creating your own pillow case covers can be a fun and rewarding DIY project. Not only does it allow you to customize your bedding to match your personal style, but it also gives you the opportunity to save money and add a personal touch to your home. In this article, we will guide you through the process of making pillow case covers, from selecting the fabric to completing the stitching.
Materials Needed
Before you start, gather all the necessary materials. Here’s a list of items you will need:
– Fabric: Choose a fabric that matches your style and is suitable for your pillow size. Cotton, linen, and flannel are popular choices.
– Pillow: A pillow of the desired size.
– Thread: A thread that complements your fabric color.
– Scissors: A pair of sharp scissors for cutting the fabric.
– Measuring tape: To measure the pillow and fabric.
– Sewing machine: Or a needle and thread if you prefer hand-sewing.
– Pins: To hold the fabric in place while sewing.
Step 1: Measure and Cut the Fabric
Start by measuring your pillow. For a standard pillow, you will need a piece of fabric that is 2 times the width of the pillow plus 2 inches for the seam allowances, and 2 times the height of the pillow plus 2 inches for the seam allowances. Cut the fabric according to these measurements.
Step 2: Fold and Pin the Fabric
Fold the fabric in half lengthwise with the right sides facing each other. Pin the fabric in place along the edges to ensure a straight line.
Step 3: Sew the Pillow Case
Using your sewing machine or a needle and thread, sew the side seams of the pillow case. Leave a 1/2-inch seam allowance and backstitch at the beginning and end of the seam to secure it.
Step 4: Hem the Edges
To finish the edges, fold the top and bottom edges over 1/4 inch and press them with an iron. Then, fold them over again 1/4 inch and press again. Sew the hem in place, leaving an opening for inserting the pillow.
Step 5: Insert the Pillow
Finally, turn the pillow case right side out and insert the pillow. Close the opening by hand-stitching or using a zigzag stitch on your sewing machine.
Congratulations! You have successfully made your own pillow case covers. Enjoy the comfort and style of your new custom bedding.
