How to Restore Flashed Phone
Flashing a phone, or installing a custom firmware, can be a powerful way to unlock the full potential of your device. However, it can also lead to unforeseen issues, such as a bricked phone that won’t turn on. If you’ve found yourself in a situation where your phone has been flashed and is now unresponsive, don’t worry. This article will guide you through the steps to restore your flashed phone to its original state or to a functional custom firmware.
1. Identify the Issue
The first step in restoring your flashed phone is to determine the extent of the problem. If your phone is completely unresponsive, you may need to use a computer and a USB cable to connect your phone to your computer. If your phone is partially responsive, you may be able to use it to access certain features or apps.
2. Boot into Recovery Mode
Recovery mode is a special mode that allows you to perform certain operations on your phone, such as flashing firmware. To boot into recovery mode, follow these steps:
- Turn off your phone.
- Press and hold the volume up and power buttons simultaneously.
- Keep holding the buttons until you see the recovery mode menu on your screen.
3. Wipe Data and Cache
In recovery mode, you can wipe the data and cache partitions to remove any corrupted files that may be causing your phone to malfunction. To do this:
- Use the volume buttons to navigate to the “Wipe Data/Factory Reset” option.
- Press the power button to select it.
- Follow the on-screen instructions to confirm the reset.
4. Flash Stock Firmware
Now that you’ve wiped the data and cache, it’s time to flash the stock firmware. You can find the stock firmware for your phone on the manufacturer’s website or from a trusted source. To flash the firmware:
- Download the stock firmware for your phone and extract it to a folder on your computer.
- Connect your phone to your computer using a USB cable.
- Open the firmware flashing tool and select the extracted firmware file.
- Follow the on-screen instructions to flash the firmware.
5. Restore Custom Firmware (if necessary)
If you want to restore your custom firmware after flashing the stock firmware, you can do so by following these steps:
- Download the custom firmware for your phone and extract it to a folder on your computer.
- Boot your phone into recovery mode.
- Use the volume buttons to navigate to the “Install ZIP from SD Card” option.
- Press the power button to select it.
- Use the volume buttons to navigate to the extracted custom firmware file and press the power button to select it.
- Follow the on-screen instructions to flash the custom firmware.
6. Reboot Your Phone
Once the firmware has been flashed, disconnect your phone from the computer and turn it on. Your phone should now be restored to its original state or running the custom firmware you installed.
Remember, flashing firmware can be risky, and it’s important to proceed with caution. Always backup your data before flashing firmware, and ensure you’re using the correct firmware for your specific phone model. If you encounter any issues during the process, don’t hesitate to seek help from online forums or professional technicians.
