How to Install an Air Conditioner in a Crank Window
Installing an air conditioner in a crank window can be a cost-effective solution for cooling a small space without the need for a permanent installation. This guide will walk you through the process of installing an air conditioner in a crank window, ensuring a hassle-free and efficient cooling experience.
Materials Needed:
Before beginning the installation, gather the following materials:
– Window air conditioner
– Screwdriver
– Level
– Caulking gun
– Sealant or weather stripping
– Safety glasses
– Gloves
Step 1: Measure the Window
Start by measuring the width and height of your crank window. Make sure to measure the opening of the window, not the frame. This will help you choose the right-sized air conditioner for your space.
Step 2: Choose the Right Air Conditioner
Select a window air conditioner that fits the dimensions of your window. Consider the cooling capacity of the unit to ensure it can effectively cool the space you intend to use it for.
Step 3: Remove Window Screen
If your window has a screen, remove it by gently sliding it out of the frame. Set the screen aside for later use.
Step 4: Clean the Window Frame
Wipe down the inside of the window frame to remove any dust, dirt, or debris. This will ensure a secure and clean installation.
Step 5: Position the Air Conditioner
Place the air conditioner in the window opening, ensuring it is level. You may need to adjust the unit slightly to fit comfortably in the space.
Step 6: Secure the Air Conditioner
Use the screws provided with the air conditioner to secure it in place. Tighten the screws, but be careful not to overtighten, as this may damage the unit.
Step 7: Install the Hinge Kit
If your air conditioner came with a hinge kit, follow the manufacturer’s instructions to install it. This will allow you to open and close the window easily while the air conditioner is in place.
Step 8: Seal the Gap
Apply sealant or weather stripping around the edges of the air conditioner to prevent air leaks. This will help improve the efficiency of the unit and keep cool air inside the room.
Step 9: Reinstall the Window Screen
Once the air conditioner is securely in place and sealed, reinstall the window screen by sliding it back into the frame.
Step 10: Test the Air Conditioner
Plug in the air conditioner and turn it on to test its cooling capabilities. Adjust the settings as needed and enjoy the cool air.
By following these steps, you can successfully install an air conditioner in a crank window, providing a convenient and cost-effective cooling solution for your space.
