How to Replace Nintendo Switch Screen
Replacing the screen on a Nintendo Switch can be a daunting task, especially if you’re not familiar with the process. However, with the right tools and a bit of patience, you can easily replace the screen yourself and save money on professional repairs. In this article, we’ll guide you through the steps to replace the Nintendo Switch screen, ensuring that your console is back to its original glory in no time.
Before you begin, gather the following tools and materials:
- Replacement screen for your specific Nintendo Switch model
- Screwdriver set (flathead and Phillips head)
- Replacement adhesive strips (if necessary)
- Compressed air or a soft brush
- Isopropyl alcohol and cotton swabs
- Replacement screen protector (optional)
Step 1: Power off and disconnect the Nintendo Switch
Before you start the replacement process, ensure that your Nintendo Switch is turned off and disconnected from any cables. This will prevent any damage to the console or the new screen.
Step 2: Remove the back cover
Using a flathead screwdriver, remove the four screws located on the back of the Nintendo Switch. These screws are typically located at the corners of the console. Once the screws are removed, gently pull the back cover off to expose the internal components.
Step 3: Disconnect the battery
Locate the battery on the back of the console. Use the flathead screwdriver to remove the single screw holding the battery in place. Once the screw is removed, gently pull the battery out of its compartment.
Step 4: Remove the old screen
Using the flathead and Phillips head screwdrivers, remove the screws holding the old screen in place. There are typically four screws on each side of the screen. Once the screws are removed, carefully lift the old screen out of the console, being cautious not to damage any of the internal components.
Step 5: Install the new screen
Place the new screen in the console, ensuring that it is aligned correctly. Use the Phillips head screwdriver to secure the new screen in place, replacing the screws that were removed in Step 4.
Step 6: Reconnect the battery and back cover
Reinsert the battery into its compartment and secure it with the screw. Replace the back cover of the console, ensuring that the four screws are tight. Use the flathead screwdriver to secure the back cover in place.
Step 7: Power on the console and test the new screen
Turn on the Nintendo Switch and check the new screen for any issues. If the screen is functioning properly, you have successfully replaced the Nintendo Switch screen. If you encounter any problems, double-check your work and ensure that all connections are secure.
By following these steps, you can replace the screen on your Nintendo Switch and save money on professional repairs. Remember to handle the console with care and take your time during the process to avoid any damage.
