How to Use Command Strips for Hanging Pictures
Hanging pictures on walls can be a daunting task, especially if you’re worried about damaging your walls or struggling to find the perfect spot. Command strips offer a convenient and damage-free solution for hanging pictures, mirrors, and other decorative items. In this article, we’ll guide you through the process of using command strips for hanging pictures, ensuring that your walls stay intact and your artwork is perfectly positioned.
Step 1: Choose the Right Command Strip
The first step in using command strips for hanging pictures is to select the appropriate strip for your needs. Command strips come in various sizes and strengths, so it’s essential to choose the right one for the weight of your picture. Check the weight limit on the packaging to ensure that the strip can support your artwork.
Step 2: Clean the Wall Surface
Before applying the command strip, make sure the wall surface is clean and dry. Any dirt, dust, or grease can prevent the strip from adhering properly. Wipe the area with a damp cloth, then let it dry completely.
Step 3: Remove the Command Strip from the Packaging
Once you’ve chosen the right command strip and cleaned the wall, remove it from the packaging. Be careful not to touch the adhesive side, as oils from your fingers can weaken the bond.
Step 4: Apply the Command Strip to the Wall
Position the command strip on the wall where you want to hang your picture. Press it firmly against the wall, ensuring that it adheres properly. Hold it in place for a few seconds to allow the adhesive to bond.
Step 5: Attach the Picture Hanger
Now that the command strip is securely adhered to the wall, attach the picture hanger to the back of your artwork. Make sure the hanger is level and securely fastened to the frame.
Step 6: Position the Picture
Hold the picture against the wall, aligning it with the command strip. Press the artwork firmly against the wall, ensuring that the command strip adheres to the back of the frame. Hold it in place for a few seconds to allow the adhesive to bond.
Step 7: Check the Alignment
After the command strip has adhered to the artwork, take a step back and check the alignment. Make sure the picture is level and centered on the wall. If necessary, adjust the position by gently pressing the artwork against the wall.
Step 8: Allow the Adhesive to Set
Give the command strip and adhesive enough time to set. This typically takes about 24 hours, but it’s best to follow the instructions on the packaging for the specific product you’re using.
Conclusion
Using command strips for hanging pictures is a simple, damage-free solution that can help you display your favorite artwork without worrying about damaging your walls. By following these steps, you can ensure that your pictures are perfectly positioned and securely attached to the wall. Happy hanging!
